Miscellaneous
TR-500
The Model TR-500 Trim Ring is designed for recess mounting the Model AE-500 Commercial Telephone Entry System. The flush-mount trim ring attaches to the wall studs or custom framing. The AE-500 attaches to the mounting ring.
Here's a list of its ...
TR-1000
The Model TR-1000 Trim Ring is designed for recess mounting the Model AE1000Plus Commercial Telephone Entry System with Access Control. The flush-mount trim ring attaches to the wall studs or custom framing. The AE1000Plus attaches to the mounting ring. ...
TR-100
The Model TR-100 Trim Ring is designed for recess mounting the Model AE-100 Commercial Telephone Entry System. The flush-mount trim ring attaches to the wall studs or custom framing. The AE-100 attaches to the mounting ring.
Here's a list of its ...
Serial Cable
Serial interface cable to connect AM3Plus, AE1000Plus, or AE2000Plus to a PC's 9-pin serial port for local programming and control.
Here's a list of its main features:
9-pin for connecting to a computers serial port
Compatible with AE-100 ...
RK-HHP Hand-Held Programmer
Secura Key standalone access control products are easy to install, easy to use and, now, easier than ever to program.The new RK-HHP fits in the palm of your hand. Just hold it in front of the access control unit and press the keys. In seconds you can ad ...
Omni Board
This device is necessary to connect the gate operators to push button stations incorporating a STOP, OPEN and CLOSE button. It's also necessary whenever the gate need to be configured for one vehicle at the time.
Here's a list of its main fe ...
LIN-MODEM
This unit has been discontinued.
Add-on telephone communications interface modem for remote programming and control of AM/II, AE-1, and AE-2.
GNC-1
The Model GNC-1 Curb Mount Gooseneck is used for easy installation of keypads, telephone entry systems, and other access control products.
Here's a list of its main features:
Curb mount configuration
Rugged, weather resistant, powder coa ...
EXA-1000
The Model EXA-1000 Omni-directional Remote Antenna is designed to enhance the radio range of Linear’s receivers. This antenna can be connected to the F connector on many Linear receivers to improve their range when they must be located in poor signal re ...
DC-2000
The DC-2000 battery backup is designed to be used with Elite Access gate operators. This battery backup allows the operation of the gate operator in case of a power failure (not continuous). This device has also been used on many other units of differen ...
CommSwitch 3.0
Not currently available.
Eliminate expensive extra phone lines. The ComSwitch 3.0 provides the three most useful features you’ll ever add to your telephone line, all in one simple device. This device provides a way to share your phone line with up to 3 ...
CCM-1A
The Model CCM-1A Color Camera mounts inside AE-100, AE-500 and AE1000Plus commercial access controllers to provide color video of the access control visitor.The camera is day/night capable, it can capture images with great detail in not only well-lit en ...
CAB-3
The Model CAB-3 Metal Outdoor Cabinet is a locking NEMA 3R rated metal cabinet for AM3Plus for use in outdoor applications, lock included. (AM3Plus access controller not included.)
Here's a list of its main features:
Locking metal cabinet ...
CAB-1
The Model CAB-1 Metal Indoor Cabinet is a locking metal cabinet for AM3Plus for use in indoor applications, lock included. (AM3Plus access controller not included.)
Here's a list of its main features:
Locking metal cabinet
For indoor use ...
AM-RRR
The Model AM-RRR Remote Radio Receiver is designed for use with Linear’s access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.Three antenna types can be used with this receive ...
AM-CRI
The AM-CRI card reader interface is designed for use with Linear's access control systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices.If the readers used have a hold or buffer connection, two readers may be used to the ...
ACM-1
The Model ACM-1 Replacement Modem is a telephone communications interface modem replacement part for AM3Plus and AE1000Plus
Here's a list of its main features:
Replacement socket modem
Compatible with AM-3Plus and AE-1000Plus
